# (decoded with TMPL 10000)
Version 
(should be 2): 2
Reserved bit: false
Reserved bit: false
Modem will enter to command mode after a break: true
Reserved bit: false
Reserved bit: false
Reserved bit: false
Reserved bit: false
Modem should default to Hardware MNP: true
Modem should default to Software MNP: false
Modem can support Software MNP: true
Modem can support Hardware MNP: true
Reserved bit: false
Direct mode (baud buffered): true
CONNECT means 300 bps with this init string: true
Reserved bit: false
Carrier Detect Signal provided: true
Initialization String: 'AT &F E0 &K3 &C1 W1 V1 B1 \N3 &D2 &Q5 \K0'
Ring Response String: ''
Preferred Baudrate 
(0 if none): 38400
Preferred Port
(empty if none): 'MODEM PORT'
Preferred Handshake
0 any
1 None
2 XOn/XOff
3 DTR/CTS
4 DTR
5 CTS: 3
Disable Hardware MNP AT Command: 'AT \N0'
Hardware MNP Confirmation String: '/ARQ'
Cabling… PICT resource: 30000
Break duration in ticks to enter command mode ( 14 = short, 210 = long ): 0